Ever wonder why some riders just pull away when it gets twisty, even though others might be a more powerful climbers or faster in a the straights?
In mountain biking, you need sufficient fitness and power to weight of course. But without bike handling skills, you will be left in the dust. In this article I will discuss cornering.
There are a couple of camps on cornering. Cross Country or Down Hill/All mountain .
DH and All Mountain riders, generally run full suspension rigs with more travel, wider tires and bars than those used by the XC crowd. They will drop the seat post, unlike XC, where the length of the rides and races preclude standing the whole time. There is debate on whether the energy savings of staying seated is worth more than the aggressive handling that a dropped seat allows. Dropper seat posts are a burgeoning option to do both.
For all turns above tip over speed 4-5 mph, initiating the turn, with a counter steer, weighting the outside grip, momentarily turning slightly opposite the turn, helps set up turning in the direction you want to go.
XC riders and racer, particularly those with a road back ground, will then steer into the turn and by weighting the inside grip and outside pedal(pedaling forward, not backwards to prevent derailing the chain and crossing gears). Not long ago more hardtails than full suspension bikes were found at the races. That ratio has flipped and there are more FS bikes now.
The DH/AM rider will also counter steer and then weight the inside grip, but here is were the dynamics differ. Ala BikeJames and Better rides, you keep your outside foot back to support the weight of the hip swing to the outside weighting that pedal down, akin to carving a ski turn, with a back pedal action.
Lee McCormack, is similar but you go into the corner with the outside foot forward, allowing you to swing your inside knee towards the inside of the corner, allowing a forward pedal to weight the outside foot.
In his
article Seb Kemp states a concern that weighting the inside grip,may push the front tire to far to the outside.
I am in the XC camp. You can read below to see how that came about. My style is more of a blend. I run my saddle a little lower than my road bike height, but still in efficient pedaling range. I will slide my but off the saddle slightly to the outside. With the outside foot down, inside leg is up high enough to do this, or even let it move in front of the saddle to get more outside if needed. I keep my upper body close to the bars to weight the front wheel, to maximize traction, with a slight up words roll to the outside. Kind of automatic when you push the inside bar down, while staying close to the bars. But like Seb says don't let the front wheel stray to far outside. I learned pressure on the inside grip method. it comes from road biking where the handlebars are much narrower. So after the counter steer, weight the inside grip to get the lean going in the direction of the turn, then drive the front wheel into the ground with the outside grip. It kind of feels like flying and the handlebars are your wings.
There are times that keeping your pedals level ground, particularly in rough terrain. There is one technical section at the
Vortex at Santos in Ocala Florida that I go in to the right and snake left and right in not much more than a bike length. I felt much more stable with the left foot back, because the two right snakes define the feature.
I see a problem with outside pedal back, weight the pedal down is effectively a back pedal. Even with a chain guide upfront, the chain can cross up in back across the the cogs. Sometimes just a nasty noise, sometimes the chain skips or jams, twists or breaks. The hopefully you just stop and not knee the stem or pitch off the bike, ouch.
I was part of a lengthy discussing at
Mountain Bike Geezer.
I started to revisit cornering after encountering machine made berms for the first time at
Tannehill Alabama, shortly after embarking on this
Quest.
I mean man made berms, not the occasional natural banking off of a the base of a tree or the contour trails that cross washes, kills and runs. Now, I have been riding for decades on fire roads and deer trails. Deer don't have much need for berms. I taught myself how to corner after reading Davis Phiney's book "Training For Cycling", oh so many years ago. being a sprinter and not a climber, he used cornering skills regain contact with the peloton on the descents. You can get copies on online cheap.
Berms actually require little technique, at speed. I had to train myself not to do my usual technique on berms. You need to keep your weigh more in line with the bike. You and the bike lean in relationship to the horizon but is nearly perpendicular to to the banked surface. To actually increase your speed, bring your mass to the inside, swing your inside knee in and opening your chest facing it toward the exit of the berm, pushing the bike into the hole that is the apex of the berm and pull the bars back to the chest on exit, pulling a wheelie or almost pulling one. I am starting to get it, letting off the brakes and using as much speed as possible, seems to be the trick.
